LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2012 >> Matrix Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 61 (Can Communication System (Diagnostic Codes & Circuit Tests)) >> Can Communication System >> Symptom Tests >> Combination Meter ECU Communication Stop Mode >> Description
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Combination Meter ECU Communication Stop Mode: Description

WARNING: This page is about a different car, the 2011 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.
Detection Item Symptom Trouble Area
Combination Meter ECU Communication Stop Mode
  • "Combination Meter" is not displayed on the "CAN Bus Check" screen of the Techstream
  • Applies to "Combination Meter ECU Communication Stop Mode" in "DTC Combination Table"
  • Power source circuit of the combination meter
  • Combination meter main wire or connector
  • Combination meter