LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2012 >> Matrix Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 94 (Theft Deterrent System / Keyless Entry System (Service Information)) >> Security Indicator Light Assembly >> Removal >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Security Indicator Light Assembly: Removal: Removal

WARNING: This page is about a different car, the 2011 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL LH  . Refer to REMOVAL - Step 3
  2. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL RH  . Refer to REMOVAL - Step 4
  3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle)  . Refer to REMOVAL - Step 21
  4. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transaxle)  . Refer to REMOVAL - Step 22
  5. REMOVE CENTER NO. 1 INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for Manual Transaxle)  . Refer to REMOVAL - Step 23
  6. REMOVE CENTER NO. 1 INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for Automatic Transaxle)  . Refer to REMOVAL - Step 24
  7. REMOVE INSTRUMENT PANEL BOX ASSEMBLY  . Refer to REMOVAL - Step 25
  8. REMOVE INSTRUMENT PANEL HOLE COVER  . Refer to REMOVAL - Step 26
  9. REMOVE TELLTALE LIGHT ASSEMBLY 
    1. Disengage the 2 claws and remove the telltale light assembly.
      Fig 1: Identifying Claws On Telltale Light Assembly
      GTY189300Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals