On-Vehicle Inspection

INSPECT SEAT POSITION SENSOR (VEHICLE NOT INVOLVED IN COLLISION)
1. Perform a diagnostic system check. Refer to DTC CHECK / CLEAR .
INSPECT SEAT POSITION SENSOR (VEHICLE INVOLVED IN COLLISION)
1. Perform a diagnostic system check. Refer to DTC CHECK / CLEAR .
2. Even if an airbag was not deployed, check if there is any damage to the seat position sensor.
  If there are any following defects, replace the seat position sensor with a new one:
  - Cracks, dents or chips on the sensor housing.
  - Cracks or other damage to the connector.
  WARNING:
  Be sure to follow the correct removal and installation procedures for the seat position sensor.