Customize Parameters
WARNING: This page is about a different car, the 2011 Toyota Matrix. However, it is still accessible from the selected car via links, so may be relevant.
HINT:
The following items can be customized.
NOTE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
- CUSTOMIZE
- Connect the Techstream to the DLC3.
- Turn the ignition switch to ON.
- Turn the tester on.
- Enter the following menu:
Customize Setting.
- Select the setting by referring to the table below.
WIRELESS DOOR LOCKDisplay (Item) Default Content Setting Wireless Control ON ON/OFF of wireless door lock function. ON/OFF Hazard Answer Back ON When LOCK switch on transmitter is pressed, all hazard warning lights illuminate once. When UNLOCK switch is pressed, all hazard warning lights illuminate twice. ON/OFF Wireless Buzzer Resp ON Function that makes wireless buzzer sound for answer-back when transmitter LOCK/UNLOCK switch is pressed ON/OFF Open Door Warning ON If door is not completely closed and transmitter LOCK switch is pressed, this function sounds a buzzer for 10 seconds. ON/OFF Auto Lock Time 60s This function controls amount of time from unlocking doors to automatic re-locking function. 30s/60s/120s Unlock 2 Operation ON Function that unlocks driver door when unlock switch on transmitter is pressed once, and unlocks all doors when pressed twice. If setting is OFF, pressing unlock switch once makes all doors unlock. ON/OFF Panic Function ON This function operates the theft deterrent system when PANIC is pressed and held for 0.8 seconds or more. ON/OFF Wireless Auto Lock ON Function to control automatic relocking of doors after unlocking with wireless door lock function. ON/OFF