LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2012 >> Matrix S, FWD, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 336 (Navigation System (Service Information)) >> Navigation Ecu >> Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Navigation Ecu: Installation: Installation

WARNING: This page is about a different car, the 2012 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL EXTENSION MODULE 
    1. Connect the connector to install the extension module.
    2. Connect the each connector to install the navigation wire.
  2. INSTALL NO. 1 RADIO BRACKET  . Refer to INSTALLATION - Step 9
  3. INSTALL NO. 2 RADIO BRACKET  . Refer to INSTALLATION - Step 10
  4. INSTALL RADIO AND DISPLAY RECEIVER WITH BRACKET  . Refer to INSTALLATION - Step 16
  5. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY  . Refer to INSTALLATION - Step 29
  6. INSTALL CENTER INSTRUMENT PANEL REGISTER ASSEMBLY  . Refer to INSTALLATION - Step 12
  7. INSTALL INSTRUMENT PANEL FINISH PANEL END LH  . Refer to INSTALLATION - Step 13
  8. INSTALL INSTRUMENT PANEL FINISH PANEL END RH  . Refer to INSTALLATION - Step 14
  9. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL LH  . Refer to INSTALLATION - Step 15
  10. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL RH  . Refer to INSTALLATION - Step 16
scientia non olet · About LEMON Manuals