DOOR CONTROL TRANSMITTER (w/o Smart Key System): Installation: Installation

WARNING: This page is about a different car, the 2012 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL TRANSMITTER BATTERY
1. Install a battery (lithium battery: CR2025) with the positive (+) side facing upward, as shown in the illustration.
  
  Fig 1: Identifying Battery Position For Installation
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  NOTE:
  - Be careful not to bend the transmitter battery electrode during insertion.
  - Keep the transmitter cover interior free of dust and oil.
  - To prevent the transmitter from being damaged, be sure to touch a grounded metal surface with your bare hands to discharge any static electricity before replacing the transmitter battery.
2. Install the cover.
  
  Fig 2: Installing Cover
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL DOOR CONTROL TRANSMITTER MODULE
1. Install the door control transmitter module into the transmitter housing case, and install the transmitter housing cover securely onto the transmitter housing case.
  
  Fig 3: Installing Door Control Transmitter Module
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL TRANSMITTER HOUSING COVER
1. Install the transmitter housing cover to the transmitter housing case.
  
  Fig 4: Installing Transmitter Housing Cover
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002