Transponder Key Amplifier: Installation: Installation

WARNING: This page is about a different car, the 2011 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL TRANSPONDER KEY AMPLIFIER
1. Connect the connector to the transponder key amplifier.
  
  Fig 1: Locating Transponder Key Amplifier Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Align the transponder key amplifier with the steering column upper bracket. Tilt the amplifier slightly and slide it into position.
  
  Fig 2: Aligning Transponder Key Amplifier With Steering Column Upper Bracket
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Push the transponder key amplifier, and engage the 2 claws to install the transponder key amplifier to the steering column upper bracket.
INSTALL UPPER STEERING COLUMN COVER . Refer to INSTALLATION - Step 13
INSTALL LOWER STEERING COLUMN COVER . Refer to INSTALLATION - Step 14
INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY . Refer to INSTALLATION - Step 9
INSTALL STEERING WHEEL ASSEMBLY (w/o Front Spoiler)
Refer to INSTALLATION
INSTALL STEERING WHEEL ASSEMBLY (w/ Front Spoiler)
Refer to INSTALLATION