Power Switch: Installation: Installation
WARNING: This page is about a different variant/trim than selected.
- INSTALL POWER SWITCH
- Attach the 2 claws to install the power switch.
- INSTALL UPPER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY . Refer to INSTALLATION - Step 27
- INSTALL INSTRUMENT CLUSTER FINISH PANEL GARNISH . Refer to INSTALLATION - Step 28
- INSTALL LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY . Refer to INSTALLATION - Step 30
- INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY . Refer to INSTALLATION - Step 31
- CONNECT CABLE TO AUXILIARY BATTERY NEGATIVE TERMINAL NOTE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected. Refer to INITIALIZATION .
- INSTALL DECK FLOOR BOX RH . Refer to INSTALLATION - Step 54
- INSTALL REAR NO. 3 FLOOR BOARD . Refer to INSTALLATION - Step 55