Occupant Classification Ecu: Removal: Removal

PRECAUTION
WARNING:
Be sure to read Precaution thoroughly before servicing. Refer to PRECAUTION .
NOTE:
- When removing front seat assembly RH, perform zero point calibration and sensitivity check. Refer to INITIALIZATION .
- When replacing the occupant classification ECU, perform zero point calibration and sensitivity check. Refer to INITIALIZATION .
REMOVE FRONT SEAT ASSEMBLY RH
HINT:
- Use the same procedure for the RH side and LH side.
- Refer to the procedure up to Remove Front Seat Assembly. Refer to REMOVAL .
REMOVE OCCUPANT CLASSIFICATION ECU
1. Disconnect the 2 connectors.
  
  Fig 1: Identifying Occupant Classification ECU, Taped Screwdriver & Claw
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Using a screwdriver with the tip wrapped with protective tape, disengage the claw and remove the occupant classification ECU.
  TEXT IN ILLUSTRATION
  
  *1 Protective Tape