DTC U0073: Sending Malfunction (Navigation to APGS); DTC U0100: Lost Communication with ECM / PCM "A"; DTC U0129: Lost Communication with Brake System Control Module; DTC U0140: Lost Communication with Body Control Module; DTC U0155: Meter ECU Communication; DTC U0293: Lost Communication with HV ECU; DTC U1135: Lost Communication with Plug-in Control Module: Procedure

CHECK DTC
1. Clear the DTCs. Refer to DTC CHECK / CLEAR .
2. Recheck for DTCs and check if the same DTC is output again.
  OK
  
  No DTCs are output.
NG → See step 3

OK → See step 2
USE SIMULATION METHOD TO CHECK. Refer to HOW TO PROCEED WITH TROUBLESHOOTING
GO TO CAN COMMUNICATION SYSTEM. Refer to HOW TO PROCEED WITH TROUBLESHOOTING