LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2012 >> Prius Plug-in >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Control System (Plug-In) (Diagnostic Codes (P0010-P0454)) >> SFI System >> DTC P0106: Manifold Absolute Pressure / Barometric Pressure Circuit Range / Performance Problem >> Typical Enabling Conditions
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Typical Enabling Conditions

Monitor runs whenever the following DTCs are not stored P0010 (VVT oil control valve)
P0011 (VVT system - advance)
P0012 (VVT system - retard)
P0016 (VVT system - misalignment)
P0107, P0108 (Manifold absolute pressure)
P0112, P0113 (Intake air temperature sensor)
P0115, P0117, P0118 (Engine coolant temperature sensor)
P0120, P0121, P0122, P0123, P0220, P0222, P0223, P2135 (Throttle position sensor)
P0125 (Insufficient coolant temperature for closed loop fuel control)
P0335 (Crankshaft position sensor)
P0340, P0342, P0343 (Camshaft position sensor)
P0401 (EGR system (closed))
P106A (Evaporative emission control system pressure sensor - Manifold pressure sensor correlation)
Auxiliary battery voltage 10.5 V or higher
Engine coolant temperature 30°C (86°F) or higher
Intake air temperature -10°C (14°F) or higher
Engine speed 1000 rpm or more
Throttle valve Close
EGR valve Close
Atmospheric pressure 76 kPa(abs) [570 mmHg(abs)] or higher