Diagnosis System
WARNING: This page is about a different variant/trim than selected.
- DESCRIPTION
The main body ECU (multiplex network body ECU) and certification ECU (smart key ECU assembly) control the LIN communication system. LIN communication system data and Diagnostic Trouble Codes (DTCs) can be read through the Data Link Connector 3 (DLC3).
When the system seems to be malfunctioning, use the Techstream to check for malfunctions and perform repairs.
- CHECK DLC3
- Check the DLC3. Refer to GENERAL INFORMATION .
- INSPECT BATTERY VOLTAGE
- Measure the battery voltage with the power switch off.
Standard Voltage
11 to 14 V
- If the voltage is below 11 V, recharge or replace the battery.
- Measure the battery voltage with the power switch off.