LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2012 >> Prius Plug-in >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 34 (Engine Control System (Except Plug-In) (Service Information)) >> Knock Sensor >> Removal >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Knock Sensor: Removal: Removal

WARNING: This page is about a different variant/trim than selected.
  1. REMOVE INTAKE MANIFOLD 
    1. Remove the intake manifold. Refer to REMOVAL .
  2. REMOVE KNOCK SENSOR 
    1. Disconnect the knock sensor connector.
    2. Remove the bolt and remove the knock sensor.
      Fig 1: Identifying Knock Sensor, Connector & Bolt
      GTY227208Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals