LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2012 >> Prius Three >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 113 (Lin Communication System (Plug-In) (Diagnostic Codes)) >> Lin Communication System >> DTC B2786: No Response from Steering Lock ECU >> Inspection Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Inspection Procedure

WARNING: This page is about a different variant/trim than selected.

HINT: 

Although "No Response from Steering Lock ECU" is displayed on the Techstream, this message is shown if the certification ECU (smart key ECU assembly) cannot communicate with the transmission control ECU assembly.

NOTE:
  • Inspect the fuses for circuits related to this system before performing the following inspection procedure.
  • If the certification ECU (smart key ECU assembly) or transmission control ECU assembly is replaced, refer to Registration. Refer to REGISTRATION .
  • When using the Techstream to troubleshoot with the power switch off:

    Connect the Techstream to the DLC3, and turn the courtesy switch on and off at 1.5-second intervals until communication between the Techstream and vehicle begins.