Intake Manifold: Installation: Installation

1. Install a new No. 1 intake manifold to head gasket to the intake manifold.
2. Install the intake manifold with the 2 bolts and 2 nuts.

   Torque: 28 N*m (286 kgf*cm, 21 ft.*lbf) 

3. Connect the fuel vapor feed hose and ventilation hose.
4. Install a new O-ring to the engine oil level dipstick guide sub-assembly.
5. Apply a light coat of engine oil to the O-ring.
6. Install the engine oil level dipstick guide sub-assembly with the 2 bolts and connect the wire harness clamp.
   Fig 1: Identifying Engine Oil Level Dipstick Guide And Fasteners

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   Bolt (A) 

   Torque: 28 N*m (286 kgf*cm, 21 ft.*lbf) 

   Bolt (B) 

   Torque: 21 N*m (214 kgf*cm, 15 ft.*lbf) 

7. Install the engine oil level dipstick.
8. Connect the 2 wire harness clamps and 3 connectors.
   Fig 2: Identifying Intake Manifold, Wire Harness Clamps

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Refer to INSTALLATION