LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2012 >> Prius Two >> Repair and Diagnosis >> Engine Performance >> Tune-Up >> Smart Key System (Keyless Start) (Except Plug-In) (Diagnostics - Introduction) >> SMART KEY SYSTEM (for Start Function) >> Diagnosis System >> Diagnosis System
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Diagnosis System

  1. DESCRIPTION 
    1. Push-button start function data and the Diagnostic Trouble Codes (DTCs) can be read through the Data Link Connector 3 (DLC3) of the vehicle. When the function seems to be malfunctioning, use the Techstream to check for malfunctions and perform repairs.
  2. CHECK DLC3 
    1. Check the DLC3. Refer to GENERAL INFORMATION .
  3. INSPECT AUXILIARY BATTERY VOLTAGE 
    1. Measure the auxiliary battery voltage.

      Standard Voltage

      11 to 14 V

      If the voltage is below 11 V, recharge or replace the auxiliary battery.

scientia non olet · About LEMON Manuals