LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2012 >> Prius Two >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 129 (Pre-Collision System (Plug-In) (Diagnostic Codes & Circuit Tests)) >> Pre-Collision System >> DTC C1A10: Front Radar Sensor >> Description
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC C1A10: Front Radar Sensor: Description

WARNING: This page is about a different variant/trim than selected.

The driving support ECU uses the millimeter wave radar sensor to detect obstacles in front of the vehicle.

Based on this information, the driving support ECU sends pre-collision control operation signals.

When the driving support ECU receives information that there is a malfunction in the millimeter wave radar sensor, DTC C1A10 is stored.

DTC No. DTC Detection Condition Trouble Area
C1A10 When the power switch is on (IG), the driving support ECU receives information that there is a malfunction in the millimeter wave radar sensor for approx. 1 second.
  • Millimeter wave radar sensor
  • Driving support ECU