DTC B2450: Initialization has not been Performed: Procedure
WARNING: This page is about a different variant/trim than selected.
- PERFORM INITIALIZATION
- Perform initialization of the headlight leveling ECU assembly. Refer to INITIALIZATION .
NEXT: Go to next step
- RECHECK FOR DTC
- Using the Techstream, recheck for DTCs. Refer to DTC CHECK / CLEAR
.
OK
DTC B2450 is not output.
HINT:
If the headlight leveling ECU assembly stores DTC B2450 even though the ECU has been initialized, there may be a malfunction in the headlight leveling ECU assembly.
NG → See step 3
OK → END
- Using the Techstream, recheck for DTCs. Refer to DTC CHECK / CLEAR
.
- REPLACE HEADLIGHT LEVELING ECU ASSEMBLY. Refer to REMOVAL