Customize Parameters

WARNING: This page is about a different variant/trim than selected.

CUSTOMIZE LIGHTING SYSTEM (EXT)

HINT:

The following items can be customized.

NOTE:

When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.

Customizing with the Techstream

Connect the Techstream to the DLC3.
Turn the power switch on (IG).
Turn the Techstream on.
Enter the following menus: Body Electrical / Main Body / Utility / Customize / Light Control.

Select the setting by referring to the table below.

LIGHT CONTROL

Display	Default	Content	Setting	Relevant ECU
Disp Ex ON Sen	NORMAL	Changes the ambient brightness level required to dim the lights such as the indicator lights of the combination meter, A/C indicator light and clock.*A	LIGHT2, LIGHT1, NORMAL, DARK1 or DARK2	Main Body ECU (Multiplex Network Body ECU)
Disp Ex OFF Sen	NORMAL	Changes the ambient brightness level required to cancel the dimming of the lights such as the indicator lights of the combination meter, A/C indicator light and clock.*B	LIGHT2, LIGHT1, NORMAL, DARK1 or DARK2
Light Auto OFF Delay	30 s	Keeps the headlights on for a certain period of time after turning the power switch off and closing all doors with the low beam headlights on.	OFF, 30 s, 60 s or 90 s
Sensitivity	Normal	Adjusts the sensitivity of the automatic light control system.*C	Light2, Light1, Normal, Dark1 or Dark2
DRL Function*1	ON	ON/OFF of the DRL function	ON or OFF

HINT:

The sensitivity adjustment may be difficult to confirm. Check by driving the customer's vehicle.

Brightness level required to dim the lights	Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Setting	DARK2	DARK1	NORMAL	LIGHT1	LIGHT2

Brightness level required to cancel the dimming of the lights	Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Setting	DARK2	DARK1	NORMAL	LIGHT1	LIGHT2

Sensitivity of the automatic light control system	Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Setting	Dark2	Dark1	Normal	Light1	Light2

Customizing with the multi-display (w/ Navigation System (for Navigation Receiver Type))

Turn the power switch on (IG).
Enter the following menus: SETUP / Vehicle / Vehicle Customization / Light Settings.

Select the setting by referring to the table below.

LIGHT SETTINGS

Display	Default	Content	Setting	Relevant ECU
Light Sensor Sensitivity	0	Adjusts the sensitivity of the automatic light control system.*A	-2, -1, 0, 1 or 2	Main Body ECU (Multiplex Network Body ECU)
Headlight Off Time Adjust	30 s	Keeps the headlights on for a certain period of time after turning the power switch off and closing all doors with the low beam headlights on.	Off, 30 s, 60 s or 90 s
Daytime Running Lights*1	On	ON/OFF of the DRL function	On or Off

HINT:

The sensitivity adjustment may be difficult to confirm. Check by driving the customer's vehicle.

Sensitivity of the automatic light control system	Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Setting	-2	-1	0	1	2

Customizing with the multi-display (w/ Navigation System (for Radio and Display Type))

Select the setting by referring to the table below.

VEHICLE SETTINGS

Display	Default	Content	Setting	Relevant ECU
Light Sensor Sensitivity	0 (Standard)	Adjusts the sensitivity of the automatic light control system.*A	-2, -1, 0, 1 or 2	Main Body ECU (Multiplex Network Body ECU)
Headlight Off Time Adjust	30 s	Keeps the headlights on for a certain period of time after turning the power switch off and closing all doors with the low beam headlights on.	Off, 30 s, 60 s or 90 s
Daytime Running Lights*1	On	ON/OFF of the DRL function	On or Off

HINT:

The sensitivity adjustment may be difficult to confirm. Check by driving the customer's vehicle.

Sensitivity of the automatic light control system	Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Setting	-2	-1	0	1	2