Customize Parameters

WARNING: This page is about a different variant/trim than selected.

CUSTOMIZE AIR CONDITIONING SYSTEM

Customizing with the Techstream

HINT:

The following items can be customized.

NOTE:

When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.

Connect the Techstream.
Turn the power switch on (IG).
Turn the Techstream on.
Enter the following menus: Customize Setting / Air Conditioner.

Select the setting by referring to the table below.

AIR CONDITIONER

Tester Display	Default	Content	Setting	Relevant ECU
Set Temperature Shift	Normal	Function to perform control with the shifted temperature versus the displayed temperature	-2C, -1C, Normal, +1C, +2C	Air conditioning amplifier assembly
Compressor Mode	Automatic	Function to turn the A/C on automatically by pressing the AUTO button when the blower is on and the A/C is off	Automatic or Manual	Air conditioning amplifier assembly
Foot/DEF Auto Mode	ON	Function to turn the airflow from FOOT/DEF on automatically when AUTO MODE is on	ON or OFF	Air conditioning amplifier assembly
Foot/DEF Automatic Blow Up Function	ON	Function to increase the blower level automatically when the defroster is on	ON or OFF	Air conditioning amplifier assembly
Ambient Temperature Shift	Normal	Function to display shifted ambient temperature versus actual ambient temperature	-3C, -2C, -1C, Normal, +1C, +2C, +3C	Air conditioning amplifier assembly
ECO MODE Cancel	OFF	Function to cancel the ECO mode drive when item is on	OFF or ON	Air conditioning amplifier assembly
Noise and Vibration Reduction	OFF	Function to change speed of the compressor when item is on	OFF or ON	Air conditioning amplifier assembly
Start Pre A/C	Long1	Function to set the activation operation method for the remote air conditioning system using the key (electrical transmitter).	1 tim ON, 2 tim ON, Long1 or Long2	Main Body ECU (multiplex network body ECU)
Stop Pre A/C	2 tim ON	Function to set the stop operation method for the remote air conditioning system using the key (electrical transmitter).	1 tim ON, 2 tim ON, Long1 or Long2	Main Body ECU (multiplex network body ECU)

Customizing using the Multi-display (w/ Navigation Receiver Type)

Turn the power switch on (IG).
Enter the following menus: SETUP / Vehicle / Vehicle Customization / Climate Settings.

Select the setting by referring to the table below.

Display	Default	Content	Setting	Relevant ECU
Auto A/C Mode	On	Function to turn the A/C on automatically by pressing the AUTO button when the blower is on and the A/C is off	On or Off	Air conditioning amplifier assembly