Integration Relay: Installation: Installation

WARNING: This page is about a different variant/trim than selected.

INSTALL NO. 1 INTEGRATION RELAY
1. Connect the 3 connectors.
2. Engage the 2 claws to install the No. 1 integration relay as shown in the illustration.
  
  Fig 1: Installing No. 1 Integration Relay & Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL NO. 1 RELAY BLOCK COVER
1. Engage the 3 claws to install the No. 1 relay block cover.
CONNECT CABLE TO AUXILIARY BATTERY NEGATIVE TERMINAL
NOTE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected. Refer to INITIALIZATION .
INSTALL DECK FLOOR BOX RH . Refer to INSTALLATION - Step 54
INSTALL REAR NO. 3 FLOOR BOARD . Refer to INSTALLATION - Step 55
INSTALL REAR NO. 2 FLOOR BOARD . Refer to INSTALLATION - Step 56