CD cannot be Inserted or is Ejected Right After Insertion: Procedure

1. Make sure that the CD is a normal audio CD, and that it is not deformed, flawed, stained, burred or otherwise defective.

   OK

   Normal audio CD.

   HINT: 

   Translucent or uniquely-shaped CDs cannot be played.

NG → CD IS FAULTY 

OK: Go to next step 

1. Check whether or not the CD is inserted upside down.

   OK

   CD is properly inserted.

NG → INSERT CD PROPERLY 

OK: Go to next step 

1. Clean the disc by wiping the CD's underside radially with a soft cloth.
   Fig 1: Cleaning Disc Surface With Soft Dry Cloth

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   OK

   Malfunction disappears.

   NOTE:

   Do not use a conventional record cleaner or anti-static preservative.

OK → CD WAS DIRTY 

NG: Go to next step 

1. Replace the CD with a normal one and check if the same problem occurs again.

   OK

   Malfunction disappears.

NG → PROCEED TO NEXT INSPECTION PROCEDURE SHOWN IN PROBLEM SYMPTOMS TABLE 

OK → CD IS FAULTY