Typical Enabling Conditions
TIMER MALFUNCTION
| Monitor runs whenever following DTC not present | None |
| Ignition switch | ON |
| Engine | Running |
| Battery voltage | 8 V or higher |
| Starter | OFF |
TIMER START-UP MALFUNCTION (CASE 1)
| Monitor runs whenever following DTC not present | None |
| Elapsed time from engine stop | Less than 1800 seconds |
| Ignition switch | ON |
| Battery voltage | 8 V or higher |
| Starter | OFF |
TIMER START-UP MALFUNCTION (CASE 2)
| Monitor runs whenever following DTC not present | None |
| Elapsed time from engine stop | 2400 seconds or more |
| Ignition switch | ON |
| Battery voltage | 8 V or higher |
| Starter | OFF |