Installation

CRUISE CONTROL: MILLIMETER WAVE RADAR SENSOR: INSTALLATION

1. INSTALL MILLIMETER WAVE RADAR SENSOR ASSEMBLY

(a) Tighten the 3 bolts on the millimeter wave radar sensor assembly.





Torque : 5.5 Nm (56 kgf-cm, 49 in-lbf)

HINT
Tighten the bolts in the order indicated in the illustration.

(b) Connect the connector.

2. ADJUST MILLIMETER WAVE RADAR SENSOR Adjustments

3. INSTALL RADIATOR GRILLE SUB-ASSEMBLY Installation