Installation

CRUISE CONTROL: DRIVING SUPPORT ECU: INSTALLATION

1. INSTALL DRIVING SUPPORT ECU

(a) Install the driving support ECU with the bolt.

Torque : 6.0 Nm (61 kgf-cm, 53 in-lbf)

NOTICE:
Do not install the driving support ECU if it has been damaged or impacted in any way.

(b) Connect the connector.

2. INSTALL LOWER INSTRUMENT FINISH PANEL SUB-ASSEMBLY Installation

3. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP

4. INSTALL COWL SIDE TRIM BOARD RH Installation

5. INSTALL DOOR SCUFF PLATE RH Installation