LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2012 >> Sienna FWD L4-2.7L (1AR-FE) >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Body and Frame >> Power Mirror Control Module >> Service and Repair >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal





MIRROR (EXT): OUTER MIRROR CONTROL ECU: REMOVAL

HINT
* Use the same procedure for both the RH and LH sides.
* The procedure described below is for the RH side.

1. REMOVE FRONT DOOR ARMREST BASE PANEL ASSEMBLY Disassembly

2. REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG Disassembly

3. REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH Disassembly

4. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY Disassembly

5. REMOVE OUTER MIRROR CONTROL ECU ASSEMBLY

(a) Disconnect the 2 connectors.

(b) Remove the 2 screws and outer mirror control ECU.