LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2012 >> Sienna FWD L4-2.7L (1AR-FE) >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Body and Frame >> Power Seat Control Module >> Service and Repair >> Seat Control Receiver >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal





SEAT: SEAT CONTROL RECEIVER: REMOVAL

1. REMOVE ROOF HEADLINING REAR GARNISH Removal

2. SEPARATE BACK DOOR WEATHERSTRIP

3. REMOVE BACK DOOR SCUFF PLATE Removal

4. REMOVE REAR NO. 2 SEAT OUTER BELT ASSEMBLY LH

HINT
Use the same procedure as for the RH side Removal.

5. REMOVE REAR DOOR SCUFF PLATE LH

HINT
Use the same procedure as for the RH side Removal.

6. SEPARATE SLIDE DOOR WEATHERSTRIP LH

7. REMOVE QUARTER TRIM PANEL ASSEMBLY LH Removal

8. REMOVE REAR NO. 2 WINDOW SIDE GARNISH ASSEMBLY LH Removal

9. REMOVE SEAT CONTROL RECEIVER





(a) Disconnect the connector.

(b) Remove the bolt, disengage the guide, and remove the seat control receiver.