Steering Column Assembly: Disassembly: Disassembly

NOTE:

When using a vise, do not overtighten it.

REMOVE STEERING LOCK ACTUATOR ASSEMBLY (w/ Smart Key System)
1. Secure the steering column assembly in a vise.
2. Using a center punch, mark the center of the tapered-head bolt.
3. Using a 3 to 4 mm (0.118 to 0.157 in.) diameter drill bit, drill a hole in the tapered-head bolt.
4. Using a screw extractor, remove the tapered-head bolt, and then remove the steering lock actuator assembly from the steering column assembly.
  
  Fig 1: Removing Steering Lock Actuator Assembly Screw Using A Screw Extractor (w/ Smart Key System)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  TEXT IN ILLUSTRATION
  
  *1 Screw Extractor
REMOVE STEERING COLUMN UPPER WITH SWITCH BRACKET ASSEMBLY (w/o Smart Key System)
1. Secure the steering column assembly in a vise.
2. Using a center punch, mark the center of the tapered-head bolt.
3. Using a 3 to 4 mm (0.118 to 0.157 in.) diameter drill bit, drill a hole in the tapered-head bolt.
4. Using a screw extractor, remove the tapered-head bolt, and then remove the steering column upper with switch bracket assembly from the steering column assembly.
  
  Fig 2: Removing Steering Lock Actuator Assembly Screw Using A Screw Extractor (w/o Smart Key System)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  TEXT IN ILLUSTRATION
  
  *1 Screw Extractor
REMOVE IGNITION OR STARTER SWITCH ASSEMBLY (w/o Smart Key System)
1. Remove the solenoid wire connector from the ignition or starter switch assembly.
  
  Fig 3: Identifying Solenoid Wire Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the 2 screws and the ignition or starter switch assembly from the steering column upper bracket.
  
  Fig 4: Identifying Ignition Or Starter Switch Assembly Mounting Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE KEY INTERLOCK SOLENOID (w/o Smart Key System)
1. Remove the 2 screws and the key interlock solenoid from the steering column upper bracket.
  
  Fig 5: Identifying Key Interlock Solenoid Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Disconnect the solenoid wire connector from the key interlock solenoid.
  
  Fig 6: Locating Key Interlock Solenoid Wire Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE SOLENOID WIRE (w/o Smart Key System)
1. Remove the solenoid wire from the steering column upper bracket.
  
  Fig 7: Identifying Solenoid Wire
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

REMOVE IGNITION SWITCH LOCK CYLINDER ASSEMBLY (w/o Smart Key System)

Turn the ignition switch lock cylinder assembly to the ACC position.

Insert a screwdriver into the hole of the steering column upper with switch bracket assembly as shown in the illustration. Pull the ignition switch lock cylinder assembly until its claw contacts the stopper of the steering column upper with switch bracket assembly.

Fig 8: Remove Ignition Switch Lock Cylinder Assembly With Screwdriver (w/o Smart Key System)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

TEXT IN ILLUSTRATION

*1	Stopper
*2	Claw
*a	Push
*b	Pull
*c	ACC
*d	LOCK

NOTE:

Make sure to pull the ignition switch lock cylinder assembly until its claw contacts the stopper of the steering column upper with switch bracket assembly. Failure to do so will affect later work operations.

Insert a screwdriver into the hole of the steering column upper with switch bracket assembly. Tilt the screwdriver as shown in the illustration to disengage the claw of the ignition switch lock cylinder assembly, and pull out the ignition switch lock cylinder assembly.

Fig 9: Identifying Direction of Removing Ignition Switch Lock Cylinder Assembly (w/o Smart Key System)

TEXT IN ILLUSTRATION

*a	Tilt
*b	Claw is Disengaged
*c	Pull Out
*d	Screwdriver Insertion Hole

REMOVE UNLOCK WARNING SWITCH ASSEMBLY (w/o Smart Key System)
1. Remove the unlock warning switch assembly by pushing up the center part and releasing the 2 claws.
  
  Fig 10: Identifying Unlock Warning Switch Assembly Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  TEXT IN ILLUSTRATION
  
  *1 Center Part