Installation

OTHER SYSTEM: VOLTAGE INVERTER: INSTALLATION

1. INSTALL VOLTAGE INVERTER ASSEMBLY

(a) Install and tighten the 2 bolts in the sequence shown in the illustration.





Torque : 7.5 Nm (76 kgf-cm, 66 in-lbf)

(b) Install the 2 bolts.





Torque : 15 Nm (153 kgf-cm, 11 ft-lbf)

(c) Connect the 2 connectors and engage the 2 wire harness clamps.

(d) Install the bolt.

Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)

2. INSTALL WIRING HARNESS PROTECTOR

(a) Install the bolt and wiring harness protector.

Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)

3. INSTALL REAR CONSOLE BOX ASSEMBLY Installation

4. INSTALL CONSOLE UPPER REAR PANEL SUB-ASSEMBLY (for Manual Transmission) Installation

5. INSTALL CONSOLE UPPER REAR PANEL SUB-ASSEMBLY (for Automatic Transmission on Separate Seat Type) Installation