How To Proceed With Troubleshooting

WARNING: This page is about a different variant/trim than selected.

VEHICLE BROUGHT TO WORKSHOP
NEXT: Go to next step
CUSTOMER PROBLEM ANALYSIS. Refer to GENERAL INFORMATION
NEXT: Go to next step
PASSENGER AIRBAG ON/OFF INDICATOR CHECK. Refer to DIAGNOSIS SYSTEM
NEXT: Go to next step

DTCs CHECK (Present and Past DTCs). Refer to DTC CHECK / CLEAR

Check for DTCs.

RESULT

Result	Proceed to
DTC is output.	A
DTC is not output.	B

A: Go to next step

DTCs CHART. Refer to DIAGNOSTIC TROUBLE CODE CHART
NEXT: Go to next step
CIRCUIT INSPECTION
NEXT: Go to next step
REPAIR OR REPLACEMENT
NEXT: Go to next step
DTC CLEARANCE (Present and Past DTCs). Refer to DTC CHECK / CLEAR
1. Clear the DTCs.
  NEXT: Go to next step

DTC CHECK (Present and Past DTCs). Refer to DTC CHECK / CLEAR

Check for DTCs.

RESULT

Result	Proceed to
DTC is not output.	A
DTC is output.	B

B → Go to 5

A: Go to next step

SYMPTOM SIMULATION. Refer to DIAGNOSIS SYSTEM

Check the passenger airbag ON/OFF indicator condition.

RESULT

Result	Proceed to
Passenger airbag ON/OFF indicator is operating normally.	A
Passenger airbag ON/OFF indicator (OFF) and SRS warning light come on.	B

B → Go to 5

A: Go to next step