LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2012 >> Yaris SE, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Occupant Classification System (Sedan) (Diagnostics - Introduction)) >> OCCUPANT CLASSIFICATION SYSTEM (for Sedan) >> DTC Check / Clear >> DTC Check / Clear
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Check / Clear

WARNING: This page is about a different variant/trim than selected.
  1. CHECK DTC 

    HINT: 

    • When DTC B1650/23 is detected as a result of troubleshooting the airbag system, troubleshoot the occupant classification system.
    • Use a Techstream to read and clear DTCs, otherwise the DTCs cannot be read and cleared.
    1. Connect the Techstream to the DLC3.
    2. Turn the ignition switch to ON.
    3. Turn the tester on.
    4. Enter the following menus: Body Electrical / Occupant Detection / Trouble Codes.
  2. CLEAR DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the ignition switch to ON.
    3. Turn the tester on.
    4. Enter the following menus: Body Electrical / Occupant Detection / Trouble Codes.
    5. Clear the DTCs.
scientia non olet · About LEMON Manuals