Customize Parameters
- CUSTOMIZING FUNCTION WITH TECHSTREAM (REFERENCE)
HINT:
The following items can be customized.
NOTE:- When the customer requests a change in a function, first make sure that the function can be customized.
- Record the current settings before customizing.
- Connect the Techstream to the DLC3.
- Turn the ignition switch to ON.
- Turn the Techstream on.
- Enter the following menus: Customize.
- Select the setting by referring to the table below.POWER WINDOW
Tester Display Default Content Setting Door Key P/W Up OFF This function is used to close the windows by operating the mechanical key. ON or OFF Door Key P/W Down OFF This function is used to open the windows by operating the mechanical key. ON or OFF P/W Up W/ Transmitter OFF This function is used to close the windows using the wireless key transmitter. ON or OFF P/W Down W/ Transmitter OFF This function is used to open the windows using the wireless key transmitter. ON or OFF P Window Auto Up Avail This function is used to enable or disable the auto up function for the front passenger door window using the power window regulator switch assembly (for front passenger side). Avail or Not Avl P Window Auto Up From Driver Avail This function is used to enable or disable the remote auto up function for the front passenger door window using the master switch. Avail or Not Avl RR Window Auto Up Avail This function is used to enable or disable the auto up function using the rear power window regulator switch assembly RH. Avail or Not Avl RR Window Auto Up From Driver Avail This function is used to enable or disable the remote auto up function for the rear RH door window using the master switch. Avail or Not Avl RL Window Auto Up Avail This function is used to enable or disable the auto up function using the rear power window regulator switch assembly LH. Avail or Not Avl RL Window Auto Up From Driver Avail This function is used to enable or disable the remote auto up function for the rear LH door window using the master switch. Avail or Not Avl Door Key Linked Back P/W UP AVAIL This function is used to close the back door window by operating the mechanical key. NOT AVL or AVAIL Door Key Linked Back P/W DOWN AVAIL This function is used to open the back door window by operating the mechanical key. NOT AVL or AVAIL
PSD & PBD OPERATION (W/ SMART KEY SYSTEM)Tester Display Default Content Setting Smart Back Door P/W Up SW AVAIL This function is used to permit or disable back door power window up operation via the back door control switch. NOT AVL or AVAIL Smart Back Door P/W Down AVAIL This function is used to permit or disable back door power window down operation via the back door control switch. NOT AVL or AVAIL Smart Back Door P/W Press ON 0.8 sec. This function is used to change the time that the back door control switch. must be pressed to operate the back door power window. 0.8 sec., 1 sec., 1.2 sec., 1.4 sec. Back Door P/W UP when half-shut NOT AVL This function is used to permit or disable back door power window up operation when the back door is ajar. NOT AVL or AVAIL