| Spark plug |
| Standard Insulation Resistance |
10 MΩ or higher |
| Recommended spark plug |
FK16HR-A8 DENSO made |
| Maximum electrode gap |
for used spark plug |
1.1 mm (0.0433 in.) |
| Electrode gap |
for new spark plug |
0.7 to 0.8 mm (0.0276 to 0.0315 in.) |
| Camshaft timing oil control valve assembly |
| Standard Resistance |
20°C (68°F) |
6.9 to 7.9 Ω |
| Throttle body with motor assembly |
| Standard Resistance |
1 (M-) - 2 (M+) |
0.3 to 100 Ω at 20°C (68°F) |
| Mass air flow meter sub-assembly |
| Standard Resistance |
1 (THA) - 2 (E2) |
13.6 to 18.4 kΩ at -20°C (-4°F) |
| 1 (THA) - 2 (E2) |
2.21 to 2.69 kΩ at 20°C (68°F) |
| 1 (THA) - 2 (E2) |
0.49 to 0.67 kΩ at 60°C (140°F) |
| Crankshaft position sensor |
| Standard Resistance |
Cold |
1630 to 2740 Ω |
| Hot |
2065 to 3225 Ω |
| Engine coolant temperature sensor |
| Standard Resistance |
20°C (68°F) |
2.32 to 2.59 kΩ |
| 80°C (176°F) |
0.310 to 0.326 kΩ |
| Knock control sensor |
| Standard Resistance |
20°C (68°F) |
120 to 280 kΩ |
| Air fuel ratio sensor |
| Standard Resistance |
1 (HA1A) - 2 (+B) |
1.6 to 3.2 Ω at 20°C (68°F) |
| 1 (HA1A) - 4 (A1A-) |
10 kΩ or higher |
| Heated oxygen sensor |
| Standard Resistance |
1 (HT1B) - 2 (+B) |
9 to 14 Ω at 20°C (68°F) |
| 1 (HT1B) - 4 (E2) |
10 kΩ or higher |
| EFI MAIN relay |
| Standard resistance |
No. 1 integration relay 1B-1 - No. 1 integration relay 1A-8 |
10 kΩ or higher (Battery voltage is not applied between terminals 1C-7 and 1E-2) |
| No. 1 integration relay 1B-1 - No. 1 integration relay 1A-8 |
Below 1 Ω (Battery voltage is applied between terminals 1C-7 and 1E-2) |
| No. 1 integration relay 1B-1 - No. 1 integration relay 1C-3 |
| No. 1 integration relay 1B-1 - No. 1 integration relay 1C-4 |
| No. 1 integration relay 1B-1 - No. 1 integration relay 1C-9 |
| No. 1 integration relay 1B-1 - No. 1 integration relay 1C-10 |
| EFI MAIN2 relay |
| Standard Resistance |
No. 1 integration relay 1A-6 - No. 1 integration relay 1D-1 |
10 kΩ or higher (Battery voltage is not applied between terminals 1A-8 and 1E-2) |
| No. 1 integration relay 1A-6 - No. 1 integration relay 1D-1 |
Below 1 Ω (Battery voltage is applied between terminals 1A-8 and 1E-2) |
| No. 1 integration relay 1A-7 - No. 1 integration relay 1D-1 |
| IG2 relay |
| Standard Resistance |
No. 1 integration relay 1A-1 - No. 1 integration relay 1D-3 |
10 kΩ or higher (Battery voltage is not applied between terminals 1C-8 and 1E-2) |
| No. 1 integration relay 1A-1 - No. 1 integration relay 1D-3 |
Below 1 Ω (Battery voltage is applied between terminals 1C-8 and 1E-2) |
| No. 1 integration relay 1A-3 - No. 1 integration relay 1D-3 |
| No. 1 integration relay 1C-1 - No. 1 integration relay 1D-3 |
| No. 1 integration relay 1C-2 - No. 1 integration relay 1D-3 |
| No. 1 integration relay 1C-5 - No. 1 integration relay 1D-3 |
| C/OPN relay |
| Standard Resistance |
No. 1 integration relay 1A-6 - No. 1 integration relay 1C-6 |
10 kΩ or higher (Battery voltage is not applied between terminals 1A-1 and 1E-1) |
| No. 1 integration relay 1A-6 - No. 1 integration relay 1C-6 |
Below 1 Ω (Battery voltage is applied between terminals 1A-1 and 1E-1) |
| No. 1 integration relay 1A-7 - No. 1 integration relay 1C-6 |