Engine Control System (Service Information): ECM: Installation: Installation

INSTALL NO. 2 ECM BRACKET
1. Install the No. 2 ECM bracket with the 2 screws.
  Torque: 3.0 N*m (31 kgf*cm, 27 in.*lbf)
INSTALL ECM BRACKET
1. Install the ECM bracket with the 2 screws.
  Torque: 3.0 N*m (31 kgf*cm, 27 in.*lbf)
INSTALL ECM
1. Install the ECM with the 3 nuts.
  Torque: 5.5 N*m (56 kgf*cm, 49 in.*lbf)
2. Connect the 6 connectors.
INSTALL 4 WHEEL DRIVE CONTROL ECU NO. 2 (for Automatic Transmission 4WD)
1. Install the four wheel drive control ECU with the bolt.
  Torque: 8.0 N*m (82 kgf*cm, 71 in.*lbf)
2. Connect the connector.
INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY . Refer to INSTALLATION - Step 28 .
PERFORM INITIALIZATION See step 6.