| Power steering fluid |
Fluid level rise |
Maximum |
5 mm (0.20 in.) |
| Fluid pressure at idle speed with valve closed |
8.3 MPA Type |
8300 to 9000 kPa (85 to 92 kgf/cm2
, 1203 to 1305 psi) |
| Fluid pressure at idle speed with valve closed |
10.0 MPA Type |
10000 to 10700 kPa (102 to 109 kgf/cm2
, 1450 to 1552 psi) |
| Fluid pressure at idle speed with valve fully open and turn the steering wheel to the full lock position |
8.3 MPA Type |
8300 to 9000 kPa (85 to 92 kgf/cm2
, 1203 to 1305 psi) |
| Fluid pressure at idle speed with valve fully open and turn the steering wheel to the full lock position |
10.0 MPA Type |
8300 to 8800 kPa (85 to 90 kgf/cm2
, 1203 to 1276 psi) |
| Fluid pressure at idle speeds of 1000 rpm and 3000 rpm |
|
490 kPa (5 kgf/cm2
, 71 psi) or less |
| Steering wheel |
Steering effort at idle speed |
Reference |
6.0 N*m (60 kgf*cm, 53 in.*lbf) |
| Power steering vane pump |
Vane pump rotating torque |
0.27 N*m (2.8 kgf*cm, 2.4 in.*lbf) or less |
| Vane plate height |
Minimum |
7.6 mm (0.299 in.) |
| Vane plate thickness |
Minimum |
1.405 mm (0.0553 in.) |
| Vane plate length |
Minimum |
11.993 mm (0.4722 in.) |
| Clearance between the rotor groove and plate |
Maximum |
0.025 mm (0.0010 in.) |
| Spring free length |
Minimum |
29.2 mm (1.150 in.) |
| Oil seal clearance |
Standard clearance |
0.021 to 0.043 mm (0.0008 to 0.0017 in.) |
| Oil seal clearance |
Maximum |
0.07 mm (0.0028 in.) |
| Power steering linK |
Total preload (tie rod rotating torque) |
Turning |
1.0 to 3.9 N*m (10 to 39 kgf*cm, 9 to 34 in.*lbf) |
| Total preload (pinion shaft rotating torque) |
Turning |
1.6 to 2.3 N*m (16 to 23 kgf*cm, 14 to 20 in.*lbf) |