LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2013 >> Land Cruiser >> Repair and Diagnosis (Single Page) >> Electrical >> Starter >> Smart Key System (For Start Function) (Diagnostic Codes & Symptom Tests) >> SMART KEY SYSTEM (for Start Function) >> DTC B2277: Detecting Vehicle Submersion >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC B2277: Detecting Vehicle Submersion: Procedure

  1. CHECK WHETHER DTC OUTPUT RECURS 
    1. Clear the DTCs. Refer to DTC CHECK / CLEAR .
    2. Check whether DTC B2277 is output 30 seconds or more after the engine switch is turned on (IG).

      OK

      No DTC is output.

    NG → REPLACE MAIN BODY ECU 

    OK → See step   2 

  2. USE SIMULATION METHOD TO CHECK. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING