Driving Support Switch Control Ecu: Removal: Removal

WARNING: This page is about a different car, the 2013 Toyota FJ Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE RADIO RECEIVER ASSEMBLY
Refer to REMOVAL
REMOVE MULTI-MEDIA INTERFACE ECU ASSEMBLY

Fig 1: Identifying Multi-Media Interface ECU Assembly, Connectors And Fasteners
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
1. Disconnect the clamp and 3 connectors.
2. Remove the 2 nuts and the multi-media interface ECU assembly.
REMOVE DRIVING SUPPORT SWITCH CONTROL ECU

Fig 2: Identifying Driving Support Switch Control ECU And Fastener
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
1. Remove the nut and the driving support switch control ECU.