April 5, 2026: LEMON Manuals is launched! Read the announcement.

Mass Air Flow Meter: Installation: Installation

WARNING: This page is about a different variant/trim than selected.

INSTALL MASS AIR FLOW METER
1. Install the mass air flow meter with the 2 screws.
  
  Fig 1: Locating Mass Air Flow Meter Connector Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  Torque: 1.0 N*m (10 kgf*cm, 9 in.*lbf)
  
  NOTE:
  Make sure that the O-ring is not cracked or does not jump out of position during installation.
2. Connect the mass air flow meter connector.