Typical Enabling Conditions

• P0712: RANGE CHECK (LOW RESISTANCE)
  
  

  The monitor will run whenever these DTCs are not present.	None
  Battery voltage	8 V or more
  Ignition switch	ON

P0713: Range check (High resistance) 

• One of the following conditions is met: Condition (A) or (B)
  CONDITION (A)
  
  

  Engine coolant temperature (ECT) or intake air temperature (IAT) at engine start	-29.375°C (-20.875°F) or less
  Time after engine start	600 seconds or more
  ECT sensor circuit fail (P0115, P0117, P0118)	Not detected
  IAT sensor circuit fail (P0112, P0113)	Not detected

  CONDITION (B)
  
  

  Engine coolant temperature (ECT) or intake air temperature (IAT) at engine start	More than -29.375°C (-20.875°F)
  Time after engine start	10 seconds or more
  ECT sensor circuit fail (P0115, P0117, P0118)	Not detected
  IAT sensor circuit fail (, P0112, P0113)	Not detected