LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2013 >> Matrix Base, Automatic Trans >> Repair and Diagnosis >> Body & Frame >> Windows >> Windows / Glass (Service Information) >> Rear Power Window Switch >> Inspection >> Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Rear Power Window Switch: Inspection: Inspection

  1. INSPECT POWER WINDOW SWITCH (for Rear LH) 
    1. Measure the resistance according to the value(s) in the table below.
      Fig 1: Identifying Power Window Switch (Rear LH Side) Connector
      GTY200003Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Standard Resistance

      Tester Connection Switch Condition Specified Condition
      3 (B) - 4 (U)
      2 (SD) - 1 (D)      		 UP Below 1 Ω
      5 (SU) - 4 (U)
      2 (SD) - 1 (D)      		 OFF Below 1 Ω
      5 (SU) - 4 (U)
      3 (B) - 2 (SD)      		 DOWN Below 1 Ω

      If the result is not specified, replace the power window switch.

  2. INSPECT POWER WINDOW SWITCH (for Rear RH) 
    1. Measure the resistance according to the value(s) in the table below.
      Fig 2: Identifying Terminals Of Power Window Switch (Rear RH Side) Connector
      GTY200004Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Standard Resistance

      Tester Connection Switch Condition Specified Condition
      3 (B) - 4 (U)
      2 (SD) - 1 (D)      		 UP Below 1 Ω
      5 (SU) - 4 (U)
      2 (SD) - 1 (D)      		 OFF Below 1 Ω
      5 (SU) - 4 (U)
      3 (B) - 2 (SD)      		 DOWN Below 1 Ω

      If the result is not specified, replace the power window switch.

scientia non olet · About LEMON Manuals