Typical Malfunction Thresholds
WARNING: This page is about a different variant/trim than selected.
| Either condition is met | 1 or 2 |
| 1. Both of following conditions A and B met | - |
| A. Engine speed - Target engine speed | Less than -100 rpm, or more than 150 rpm (A/C off and shift position is not neutral) Less than -100 rpm, or more than 200 rpm (A/C on or shift position is neutral) |
| B. IAC flow rate learned value | 1.1 L/sec. or less, or 6 L/sec. or more for 5 seconds or more |
| 2. Both of following conditions C and D met | - |
| C. Frequency that both of following conditions (a) and (b) met | 5 times or more |
| (a) Engine speed - Target engine speed | Less than -100 rpm, or more than 150 rpm (A/C off and shift position is not neutral) Less than -100 rpm, or more than 200 rpm (A/C on or shift position is neutral) |
| (b) Vehicle condition | Stopped after being driven at 6.25 mph (10 km/h) or more |
| D. Amount of change of IAC flow rate learning value | +2.46 L/sec. or more or -2.46 L/sec. or less |