With Smart Key System
CAUTION:
To avoid engine from starting, DO NOT depress brake pedal when selecting modes.
NOTE:
On vehicles with smart key system, make sure smart key is in the vehicle. Pressing the "ENGINE START STOP" switch changes the ignition switch mode as follows:
- First Time - ACC mode (accessories on).
- Second Time - ON mode (power on and all accessories on).
- Third Time - Power OFF mode (indicator light is off).
- Place smart key system in power OFF mode with odometer displaying Trip A.
- Place smart key system in ON mode while holding down trip meter RESET button (stem).
- Hold trip meter RESET button (stem) down for at least 5 seconds. Odometer should indicate "000000" and MAINT reminder light goes out.