April 5, 2026: LEMON Manuals is launched! Read the announcement.

Exhaust Pipe And Catalytic Converter (For 2WD): Removal: Removal

WARNING: This page is about a different variant/trim than selected.

REMOVE TAIL EXHAUST PIPE ASSEMBLY
1. Remove the 2 bolts and 2 compression springs.
  
  Fig 1: Remove/Install Tail Exhaust Pipe Assemblies
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the tail exhaust pipe assembly from the 3 exhaust pipe supports. (for Torsion beam type suspension)
3. Remove the tail exhaust pipe assembly from the 2 exhaust pipe supports. (for Double wishbone type suspension)
4. Remove the gasket from the center exhaust pipe assembly.
5. Remove the exhaust tail pipe baffle sub-assembly. (with baffle model)
REMOVE HEATED OXYGEN SENSOR . Refer to REMOVAL - Step 2
REMOVE CENTER EXHAUST PIPE ASSEMBLY
1. Remove the 2 bolts.
  
  Fig 2: Remove/Install Center Exhaust Pipe Assemblies
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the center exhaust pipe assembly from the 2 exhaust pipe supports. (for Torsion beam type suspension)
3. Remove the center exhaust pipe assembly from the 3 exhaust pipe supports. (for Double wishbone type suspension)
4. Remove the gasket from the front exhaust pipe assembly.
REMOVE FRONT EXHAUST PIPE ASSEMBLY
1. Remove the 2 bolts, 2 compression springs and front exhaust pipe assembly.
  
  Fig 3: Locating Center Exhaust Pipe Assembly Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the gasket from the exhaust manifold.