Crankshaft Position Sensor: Inspection: Inspection
WARNING: This page is about a different variant/trim than selected.
- INSPECT CRANKSHAFT POSITION SENSOR
- Measure the resistance.
Standard Resistance
Tester Connection Condition Specified Condition 1 - 2 Cold 985 to 1600 Ω 1 - 2 Hot 1265 to 1890 Ω HINT:
In the table above, the terms Cold and Hot refer to the temperature of the coils. Cold means approximately -10 to 50°C (14 to 122°F). Hot means approximately 50 to 100°C (122 to 212°F).
If the resistance is not as specified, replace the crankshaft position sensor.
- Measure the resistance.