DTC C1280/82: Engine Circuit Malfunction: Procedure
WARNING: This page is about a different variant/trim than selected.
- REPLACE 4WD CONTROL ECU. Refer to REMOVAL
- CHECK FOR DTC
- Refer to DTC CHECK / CLEAR .
- Turn the ignition switch off.
- Turn the ignition switch to ON and check that the Engine control DTC is not output.
Result
Result Proceed to DTC is not output A Engine control DTC is output B
B → See step 3
A → See step 1
- GO TO SFI SYSTEM. Refer to DIAGNOSTIC TROUBLE CODE CHART