April 5, 2026: LEMON Manuals is launched! Read the announcement.

PCV Valve: Installation: Installation

WARNING: This page is about a different variant/trim than selected.

INSTALL VENTILATION VALVE SUB-ASSEMBLY
1. Apply adhesive to 2 or 3 threads of the ventilation valve sub-assembly.
  
  Fig 1: Applying Adhesive To Threads Of Ventilation Valve
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Using a ball joint lock nut wrench (22 mm), install the ventilation valve sub-assembly.
  
  Fig 2: Identifying Ventilation Valve Sub-Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  without a ball joint lock nut wrench (22 mm)
  
  Torque: 20 N*m (204 kgf*cm, 15 ft.*lbf)
  
  with a ball joint lock nut wrench (22 mm)
  
  Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
INSTALL INTAKE MANIFOLD
Refer to INSTALLATION