April 5, 2026: LEMON Manuals is launched! Read the announcement.

Engine Coolant Temperature Sensor: Installation: Installation

WARNING: This page is about a different variant/trim than selected.

INSTALL ENGINE COOLANT TEMPERATURE SENSOR
1. Install the engine coolant temperature sensor through a new gasket.
  
  Fig 1: Locating Engine Coolant Temperature Sensor
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  Torque: 20 N*m (200 kgf*cm, 14 ft.*lbf)
2. Connect the engine coolant temperature sensor connector.
  
  Fig 2: Locating Engine Coolant Temperature Sensor Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
ADD ENGINE COOLANT . Refer to REPLACEMENT - Step 2
INSPECT FOR COOLANT LEAK . Refer to ON-VEHICLE INSPECTION - Step 1
INSTALL AIR CLEANER CAP SUB-ASSEMBLY WITH HOSE See step 2
INSTALL NO. 2 CYLINDER HEAD COVER . Refer to INSTALLATION - Step 85