LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2013 >> Matrix S, FWD, Automatic Trans >> Repair and Diagnosis (Single Page) >> Transmission >> Automatic Trans >> Automatic Transmission (U250E) (Diagnostic Codes & Circuit Tests) >> Automatic Transaxle System >> DTC P0705: Transmission Range Sensor Circuit Malfunction (PRNDL Input) >> Description
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC P0705: Transmission Range Sensor Circuit Malfunction (PRNDL Input): Description

The park/neutral position switch detects the shift lever position and sends signals to the ECM.

DTC No. DTC Detection Condition Trouble Area
P0705 (A) Any 2 or more signals of the following are ON simultaneously (2-trip detection logic)
  • P input signal is ON.
  • N input signal is ON.
  • R input signal is ON.
  • D input signal is ON.

(B) Any 2 or more signals of the following are ON simultaneously (2-trip detection logic)
  • NSW input signal is ON.
  • R input signal is ON.
  • D input signal is ON

(C) When any of following conditions is met for 2.0 sec. or more in the S position (2-trip detection logic)
  • NSW input signal is ON.
  • P input signal is ON.
  • N input signal is ON.
  • R input signal is ON.

(D) All switches are OFF simultaneously for NSW, P, N, R, D positions (2-trip detection logic).
  • NSW input signal is OFF.
  • P input signal is OFF.
  • N input signal is OFF.
  • R input signal is OFF.
  • D input signal is OFF
  • Open or short in park/neutral position switch circuit
  • Park/neutral position switch
  • ECM