WIRELESS DOOR LOCK CONTROL SYSTEM (w/ Smart Key System): Precaution: Precaution

PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

NOTE:

When disconnecting the cable from the negative (-) auxiliary battery terminal, initialize the following system after the cable is reconnected.

System Name	See Procedure
Power Door Lock Control System	Refer to INITIALIZATION

PRECAUTIONS WHEN USING TECHSTREAM
1. When using the Techstream with the power switch off to troubleshoot:
  Connect the Techstream to the vehicle, and turn a courtesy light switch on and off at 1.5-second intervals until communication between the Techstream and the vehicle begins.
2. After all DTCs are cleared, check if the malfunction occurs again 6 seconds after the power switch is turned to on (IG).