RELAY (w/ Headlight Cleaner System): Installation: Installation

INSTALL HEADLIGHT CLEANER CONTROL RELAY
1. Engage the claw to install the headlight cleaner control relay as shown in the illustration.
  
  Fig 1: Locating Headlight Cleaner Control Relay Claw
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the washer jar assembly with the bolt.
  
  Fig 2: Locating Washer Jar Connectors And Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  Torque: 5.5 N*m (56 kgf*cm, 49 in.*lbf)
3. Engage the clamp.
4. Connect the 2 connectors.
5. Connect the 2 washer hoses.
  
  Fig 3: Locating Washer Hoses
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
6. Engage the hose clamp.
7. Install the 2 bolts.
  
  Fig 4: Locating Washer Jar Connectors, Clamp And Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  Torque: 5.5 N*m (56 kgf*cm, 49 in.*lbf)
8. Engage the clamp.
9. Connect the 2 connectors.
10. Connect the washer jar cap to the washer jar assembly.
  
  Fig 5: Locating Washer Jar Cap Clip
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
11. Engage the clip.
INSTALL INLET AIR CLEANER ASSEMBLY . Refer to INSTALLATION - Step 68
INSTALL FRONT BUMPER ASSEMBLY . Refer to INSTALLATION - Step 1
INSTALL RADIATOR SUPPORT OPENING COVER . Refer to INSTALLATION - Step 2
ADD WASHER FLUID . Refer to INSTALLATION - Step 2
PREPARE VEHICLE FOR FOG LIGHT AIM ADJUSTMENT (w/ Fog Light) . Refer to ADJUSTMENT - Step 1
PREPARE FOR FOG LIGHT AIMING (w/ Fog Light) . Refer to ADJUSTMENT - Step 2
INSPECT FOG LIGHT AIMING (w/ Fog Light) . Refer to ADJUSTMENT - Step 3
ADJUST FOG LIGHT AIMING (w/ Fog Light) . Refer to ADJUSTMENT - Step 4